Hardwood Flooring * | Banff 3/4 In. Thick X 2 In. Width X 78 In. Length Hardwood Overlap Stair Nose Molding By Optiwood

Optiwood Hardwood Stair Nose Is Used On Steps, Landings, Or Stairs With Optiwood Planks To Complete The Tread. If You Plan To Make Stair Risers, You Will Need To Bring The Riser Up Flush With The Existing Tread For The Riser To Fit Under The Stair Nose. You Can Also Use Stair Nosing Wherever You Have A Floor That Is Raised Above The Adjoining Area. It Is Best To Glue The Stair Nose With High Grade Construction Adhesive To Ensure It Will Stay Firmly Attached. Note: Stairs That Have An Existing Bull Nose Will Need To Have The Bull Nose Removed Prior To Using Stair Nosing. Designed To Complement And Coordinate With Specific Optiwood Hardwood Flooring.

• Wood Species: Real Domestic White Oak
• 3/4 In. Thick X 2 In. Wide X 78 In. Length
• Item Coordinates With 2/7 In. Flooring
• 78 In. Length Per Molding And Molding Weight: 3 Lbs.
• Construction: Solid Real Domestic White Oak Molding
• Prefinished Banff Medium Color, Low Gloss, Smooth With Wire Brushing/Natural Graining Finish
• Janka Wood Hardness Rating/Resistance To Denting: 1360
• Appropriate Grade For Installation: Above Grade, On Grade Or Below Grade
• Installation: High Grade Construction Adhesive
• Residential And Commercial Use
• Don’T Forget Your Coordinating Trim And Moldings
• All Online Orders For This Item Ship Via Parcel Ground And May Arrive In Multiple Boxes
• It Is Recommended You Purchase A Minimum Of 10% Overage To Account For Cuts.
• Photo Is A Representation Of Molding Profile
• Designed To Complement And Coordinate With Specific Opti Wood Hardwood Flooring